SIAM TECHNIC CONCRETE PUBLIC COMPANY LIMITEDSET: STECH🇹🇭 TH

Business Operation · 2024

Corporate Information

Company Name

SIAM TECHNIC CONCRETE PUBLIC COMPANY LIMITED

Telephone

0-2589-3888

Website

www.stec.co.th

Email

panchaporn.ch@stec.co.th (Invester Relation)

Dividend Policy

Dividend Policy

Each year, the Company pays dividends to stockholders equal to at least 40.00 percent of net profit after corporate income tax and legal reserve. The Company will consider dividend payments based on a variety of criteria in order to maximize shareholder value, and dividend payments must have only a minimal impact on the Company's usual operations. Dividend payments are subject to vary based on the Company's operating results and financial situation, liquidity, business expansion plans, future requirement and suitability, and other considerations deemed acceptable by the Board of Directors.            


The shareholders' meeting must approve the Company's annual dividend payment, except for interim dividends, which the Board of Directors may approve when the Company is deemed to have sufficient profit to pay dividends without impairing operations and will report to the shareholders' meeting for acknowledgement at the following meeting.

Historical Dividend Payments

This YearLast Year2 Years Ago3 Years Ago4 Years AgoMetricDescriptionRemark
0.160.180.140.150.27Net profit per share (Baht : Share)Net profit per share (baht : share)
0.030.030.050.380Dividend per share (Baht : Share)Dividend per share (baht : share)
Year 2023 = 0.026 Year 2024 = 0.034
00000Dividend stock ratio (Number of original shares: dividend shares)Ratio of stock dividend payment (existing share : stock dividend)
00000Dividend share value per share (Baht : Share)Value of stock dividend per share (baht : share)
00.030.050.380Total dividend payment value (Baht : Share)Total dividend payment (baht : share)
013.8137.31189.460Dividend payout ratio to net profit (%)Dividend payout ratio compared to net profit (%)

Major Shareholders

Major Shareholders

No.NameShares% SharesParent No.
2,466Ruam Chai Kij Company Limited357,000,00049.24
3,398Mongkolsrisawad Family70,962,3509.79
3,399Wongthananan family31,311,5204.32
3,400Mr. Watchai Mongkolsrisawad2,041,1600.283,398
3,401Mr. Kachen Mongkolsrisawad34,202,1904.723,398
3,402Mr. Jadskorn Mongkolsrisawad34,719,0004.793,398
3,403Mr. Chaiyong Wongthananan5,875,0000.813,399
3,404Ms. Ratchanakorn Kongyuenyongvanich5,875,0000.813,399
3,405Mr. Chanchanon Wongthananan8,824,6101.223,399
3,406Ms. Warittha Wongthananan10,736,9101.483,399
3,407Mr. Chettha Damrongphon20,310,8002.8
3,408Mr. Suwat Supakamolsenee12,541,5001.73
3,409Akkapaiboon family12,700,0001.75
3,410Mrs. Nusara Akkapaiboon4,935,0000.683,409
3,411Mr. Somyot Akkapaiboon7,436,0001.033,409
3,412Opapaiboon family9,200,2901.27
3,413Ms. Nattha Akkapaiboon329,0000.053,409
3,414Mr. Jatupon Opapaiboon6,401,0300.883,412
3,415Mr. Sopon Opapaiboon2,799,2600.393,412
3,416Mr. Chakraphan Mongkolsrisawat9,045,4001.25
3,417MR. Sadet Phonprayot8,485,6001.17
8,590Mrs. Nuanchan Thawornwongkajorn7,500,0001.03
8,593Mr. Tanapoon Srinawakoon7,113,3000.98
8,594 Mr. Vivaris Wongyot6,287,4000.87
8,595Kampakdee family6,021,5000.83
8,596Mr.Sopon Kampakdee2,902,9000.48,595
8,628Mrs. Yatee Kampakdee2,196,4000.38,595
8,629Ms. Thitawan Kampakdee922,2000.138,595
8,630Ms. Kanoknut Jindachotsiri6,035,0000.83
8,631Mr. Noraboon Naenna5,854,7000.81
8,632Mr. Roongsak Yantaporn5,100,0000.7
8,633Mr. Chaiwat Chuangchoo3,654,0000.5

Business Strategies Overview

Vision

The Company is committed to being the market leader in prestressed concrete products in the country through effective management by trained employees, capable of meeting customer needs and ensuring optimum satisfaction.

Objectives

1.  Strengthening and developing production

2.  Creating an efficient management system

3.  Enhancing personnel's potential for quality

4.  Developing the organization for sustainable growth

Goals

The Company continuously invests in the development of manufacturing processes, personnel potential, machine efficiency, technology, and product quality in order to produce prestressed concrete products of the highest standard of quality, strength, beauty, and durability under the trademark   "STEC"   and the slogan "Everyone is Value, Every Product is Quality." The Company also invests in providing excellent service under the slogan "Your satisfaction is our service goal."

Business Strategies

1.  Corporate growth strategy

2.  Cost reduction strategy

3.  Marketing development strategy

4.  Employee potential development

5.  Production process development


Material Changes & Developments

Material Changes & Developments

YearDescription
2,001

 Established The Company  The Company acquired the first factory in Don Phot District, Saraburi Province

2,003

The Company acquired the factory in Lamphun and Sukhothai provinces. Starting a construction contracting business

2,004

The Company  acquired the factory in Buriram province

2,006

The Company acquired the factory in Ubon Ratchathani province

2,007

The Company  acquired the factory in Khon Khen province

2,008

The Company  acquired the factory in Chonburi province

2,016

The Company established Spun pile factory. Change The Company name from Saraburi Technic Concrete to Siam Technic Concrete

2,017

The Company established the factory in Nakhon Rachasima province

2,018

The Company has ceased operation in the general construction sector in the purposed of avoid conflict of interest between The Company and related company

2,019

The Company convert into public limited company

2,021

The Company has registered in Stock Exchange of Thailand


The Company acquired the factory in Chonburi province. (Chonburi 2) and Establishment of 9 new subsidiaries

2,022

The Establishment of New Subsidiary "Siam Steel Wire Company Limited"

2,023

The Establishment of New Subsidiary "Siam Steel Wire Tradnig Company Limited"

2,024

Siam Steel Wire Company Limited - begins the production process and begin to recognize revenue


Investment in Wangconcrete Co.,Ltd. Surat Thani Province


The Dissolution of subsidiary

1. Siam Technic Micropile Co.,Ltd.

2. Siam Technic Concrete (Saraburi) Co.,Ltd.

3. Siam Technic Concrete (Nakorn Rachasima) Co.,Ltd.

4. Siam Technic Concrete (Lumphun) Co.,Ltd. 

5. Siam Steel Wire Trading Co.,Ltd. 

Use of Proceeds from Securities Offerings

Is There Money Raised from a Securities Offering Still to Report On?

No

Commitments Made in the Registration Statement

Are There Commitments or Conditions from an Offering or Listing?

No

Group Operating-Structure Policy

Description

On 31 December 2024, The Company has a shareholding or investment structure in subsidiaries as follows

Companies Where the Company Holds ≥10%

Companies (≥10% Holding)

Company NameAddressProvinceZip CodeTelephoneBusiness TypeSecurity TypeSharesPaid-up Shares
Siam Technic Concrete (Sukhothai) Company Limited221 Moo 4, Singhawat Road, Ban Lum Sub-district, Mueang Sukhothai DistrictSukhothai64000055-611612Distributor of prestressed concrete products and construction contractors for the installation of 115 kV transmission lines and design, procure, and install of fiber optic cable, and the project to bring electric cables undergroundCommon shares1,000,0001,000,000
Siam Technic Concrete (Buriram) Company Limited333 Moo 16, Samed Sub-district, Mueang Buriram DistrictBuriram31000044-613301Distributor of prestressed concrete products and construction contractors for the installation of 115 kV transmission lines and design, procure, and install of fiber optic cable, and the project to bring electric cables undergroundCommon shares1,000,0001,000,000
Siam Technic Concrete (Khon Kaen) Company Limited113 Moo 4, Ban Haed Sub-district, Ban Hat DistrictKhon Kaen40110043-306500-1Distributor of prestressed concrete products and construction contractors for the installation of 115 kV transmission lines and design, procure, and install of fiber optic cable, and the project to bring electric cables undergroundCommon shares1,000,0001,000,000
Siam Technic Concrete (Ubon Ratchathani) Company Limited34 Moo 4, Khok Kong Sub-district, Samrong DistrictUbon Ratchathani34360045-303137Distributor of prestressed concrete products and construction contractors for the installation of 115 kV transmission lines and design, procure, and install of fiber optic cable, and the project to bring electric cables undergroundCommon shares1,000,0001,000,000
Siam Technic Power Company Limited50 Soi Ngamwongwan, 47 Intersection 20, Ngamwongwan Road, Thung Song Hong Sub-district, Lak Si DistrictBangkok1021002-589-3888Distributor of prestressed concrete products and construction contractors for the installation of 115 kV transmission lines and design, procure, and install of fiber optic cable, and the project to bring electric cables undergroundCommon shares1,000,0001,000,000
Siam Steel Wire Company Limited212 Moo2, Nong Irun, Banbueng DistrictChonburi2017002-589-3888Manufacturer and Distributor steel wireCommon shares350,000,000350,000,000
Wang Concrete Compay Limited133 Moo.2, Tung Kong Sub-district, Kanchanadit DistrictSurat Thani84290077-227-298Distributor of prestressed concrete products and construction contractors for the installation of 115 kV transmission lines and design, procure, and install of fiber optic cable, and the project to bring electric cables undergroundCommon shares20,000,00020,000,000

Shareholders with Potential Conflict of Interest

Has Potential-Conflict Shareholder (Y/N)

No

Relationships Among Major Shareholders

Relationship Exists (Y/N)

Yes

Description

Ruam Chai Kij Company Limited is a major shareholder of the Company, owning 49.24 percent of the total issued and paid-up shares of STECH (on 31 December 2024), and the Mongkolsrisawad family owns 9.72 percent through the major shareholder's shareholding structure in other companies. The details are as follows

Shareholders' Agreement

Agreement Exists (Y/N)

No

Shareholding Diagram (Group Structure)

Subsidiaries

Company NameJuristic Persons / Holders
Siam Technic Concrete (Sukhothai) Company LimitedSIAM TECHNIC CONCRETE PUBLIC COMPANY LIMITED · Voting rights percent: 99.97 · Shareholding proportion percent: 99.97
Siam Technic Concrete (Buriram) Company LimitedSIAM TECHNIC CONCRETE PUBLIC COMPANY LIMITED · Voting rights percent: 99.97 · Shareholding proportion percent: 99.97
Siam Technic Concrete (Khon Kaen) Company LimitedSIAM TECHNIC CONCRETE PUBLIC COMPANY LIMITED · Voting rights percent: 99.97 · Shareholding proportion percent: 99.97
Siam Technic Concrete (Ubon Ratchathani) Company LimitedSIAM TECHNIC CONCRETE PUBLIC COMPANY LIMITED · Voting rights percent: 99.97 · Shareholding proportion percent: 99.97
Siam Technic Power Company LimitedSIAM TECHNIC CONCRETE PUBLIC COMPANY LIMITED · Voting rights percent: 99.97 · Shareholding proportion percent: 99.97
Siam Steel Wire Company LimitedSIAM TECHNIC CONCRETE PUBLIC COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
Wang Concrete Compay LimitedSIAM TECHNIC CONCRETE PUBLIC COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0

Income Structure

Product / Service Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenue from operationsTotal revenue from operations2,096,1521002,001,5621002,125,484100
Revenue from Sale and Service2,039,53897.31,791,56889.512,000,22394.11
Revenue form Construction project42,8152.04177,8648.89116,8235.5
OtherOthers13,7990.6632,1301.618,4380.4

Export Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenueTotal revenue2,096,1521002,001,5621002,125,484100
DomesticDomestic2,096,1521002,001,5621002,125,484100
InternationalInternational000000

Other Income

Operating Other IncomeNon-Operating Other IncomeShare of Profit
1710 · As of year: 13799.0 · Description: Total other income · As of yesteryear: 32130.0 · As of year before yesteryear: 8438.0 · 1711 · As of year: 0.0 · Description: Other income from operations · As of yesteryear: 0.0 · As of year before yesteryear: 0.01712 · As of year: 13799.0 · Description: Other income not from operations · As of yesteryear: 32130.0 · As of year before yesteryear: 8438.01713 · As of year: 0.0 · Description: Share of profit · As of yesteryear: 0.0 · As of year before yesteryear: 0.0

Product / Service Characteristics

Business Type

3114

Business Groups

Business GroupDescription
1. Prestressed concrete piles

Prestressed concrete piles play a critical role in the construction of foundations. The piles will be buried all the way down to the solid soil layer in order to withstand the weight of various construction structures. Then it is transported to the soil via friction between the pile's surface and the earth, as well as resistance at the pile's end. Prestressed concrete piles undergo a lengthy manufacturing process that involves PC wire and pouring quick-hardening cement concrete into the form. After the concrete has set, the high-tensile wire is severed. Compression is imparted to the concrete as the high tensile wire is pressed into it. This increases the bending strength of the concrete. Additionally, prestressed concrete mitigates the issue of pile cracking. The Company's piles are manufactured in accordance with the requirements and standards for industrial products (TIS) issued by the Thai Industrial Standards Institute (TISI).

2. Electric pole and prestressed concrete products used to assemble electric poles

Electric pole and prestressed concrete products used to assemble electric poles are product categories that are employed by the Electricity Authority in the construction and installation of high-voltage transmission lines. This group of products will be manufactured under the regulations and standards of state enterprises such as the Provincial Electricity Authority (PEA), the Metropolitan Electricity Authority (MEA) and the Electricity Generating Authority (EGAT). It is also certified for the quality management system according to international standards ISO 9001 : 2015. The Company produces high-quality products that are acceptable to consumers and meet their needs. The products used to assemble each type of electric pole have the following distinct characteristics:

3. Girder

The concrete girder is a component of the superstructure of the bridge. The concrete girder is a structural component that supports the weight of the bridge and, in the future, the weight of the traffic on the bridge, which is expected to increase.  As a result, the concrete girder must be sturdy, durable, and capable of withstanding extreme bending forces. The Company will manufacture concrete girders in accordance with the structural design, specifications, and customer needs specified by the Department of Highways (TSD), the Department of Rural Roads (TCC), and the Department of Public Works and Town and Country Planning (TCC).


The plank girder, like the concrete girder, is a component of the upper bridge construction. It resembles a big concrete slab, approximately 5–12 meters in length, that is used to support concrete beams. This will be the section that bears the brunt of the traffic's weight immediately. Plank girder will be built in accordance with the specifications established by the Department of Highways (TSD), the Department of Rural Roads (TCC), and the Department of Public Works and Town and Country Planning (TCC).

4. Prestressed reinforced concrete piles by using centrifugal force (spun pile / round pile)

Spun piles are spherical hollow columns with prestressed steel wire frames inserted in the surrounding concrete. The concrete is spun at high speeds. The concrete will be compacted, increasing its strength, as concrete has a larger density than other types of concrete. As a result, spun piles can support far greater weight than other types of piles. In general, spun piles are utilized in large-scale building industries that demand strong foundation piles with a high load-bearing capacity to protect structures from damage caused by natural disasters and major accidents. As a result, spun piles are frequently employed in the construction of huge structures and/or constructions requiring a high level of security, such as airports, ports, highways, and major buildings. Spun piles are made pursuant to a license bearing the TIS industrial standard No. 398-2563 .   


This form of piling can be accomplished in a variety of ways: with a simple crane (gantry crane), a hydraulic crane, and hydraulic static pile driver. However, depending on the area's requirements or limits, preboring may be combined with hammering. The Company's spun pile products are available in a variety of sizes, with diameters ranging from 300 to 800 millimeters and lengths up to 18 meters. They can be linked in up to three parts.

5. Other concrete products

Slab

The slab has the cross-sectional shape of a plank and is suited for basic building construction because it is more convenient, faster, and cost-effective to produce than the cast system floor. The slabs can always be stacked adjacent to one another. When concrete is poured on top of the face (structural topping), it forms a seamless composite with the final floor. The Company's slab will feature a solid plank cross-section, a width of 35 centimeters, a thickness of 5 centimeters, and a certain number of prestressed wires, and will be utilized for modest tasks with a span of up to 4.50 meters, such as general building construction. The company develops and sells slabs with the industrial standard mark TIS. 828-2546 in sizes ranging from 2–4 meters.


Gutter

It has the appearance of a precast concrete drainage gutter and is constructed of high-quality concrete. There are numerous sizes available to meet the needs of clients. At the moment, gutters are utilized in the construction industry, industrial plants, housing developments, private homes, government offices, and petrol stations, among other places.


Manhole

It appears to be a deep well. It is roughly 1.65 meters deep and constructed of reinforced concrete of the highest grade. There are a variety of sizes available in respect to the diameter of the sewer pipe. Nowadays, manholes are frequently used in the construction of buildings, highways, industrial facilities, housing developments, residential homes, government offices, and petrol stations, among other applications.  


Precast beams

The precast beams serve as the horizontal components of the structure, which is primarily utilized for buildings or general housing and is constructed of high-quality reinforced or prestressed concrete. There are numerous sizes available to meet the needs of clients.


Precast column

Precast columns are employed as vertical components of the structure, which is the primary structural form utilized in buildings or general housing, and are constructed of high-quality reinforced or prestressed concrete. There are numerous sizes available to meet the needs of customers.

6. Other services

Transportation of various types of concrete products

By utilizing a tow truck and the Company's transport trailers, the Company provides transportation services that are appropriate for the nature of the goods. Additionally, there is collaboration with external transport companies that specialize in pile transportation to assist in the delivery of products to satisfy the needs of customers around the country within the required time period.


Piling service

With advanced machinery, the Company provides hammering services for piling products and spinning piles. Piling is a fundamental principle in which the Company excels, as these services serve as the foundation for the strength of the construction work and serve to transfer the building's weight to the ground. As a result, without experience in pile driving and hammering piles with unequal depths, the structure will eventually collapse and break. Engineers and specialists will be on hand to assist and fix any issues that may develop during piling, ensuring that customers receive efficient and prompt service for pile drive services. The Company's pile driving machines are available in a variety of sizes to fit the size of the product and the nature of the appropriate area generated by the pile driving machines. There will be routine maintenance and a verification of the machines' readiness prior to each entry into service.

Pure Drive

Piling with gantry cranes, track cranes, rubber wheel cranes, and hydraulic cranes are all methods of hammering by raising the pendulum to a high position and then letting it fall on the pile head (Drop Hammer), which is currently widely used due to its low cost but has the disadvantage of generating a great deal of vibration.

Pre-bore

Pre-boring is used in situations where the soil layer is extremely hard and cannot be hammered or pressed normally without causing harm to the pile. This process involves drilling through the troublesome soil layer and then hammering or pressing to the desired depth. This method also addresses the issue of piles not being driven down to the desired depth.

Auger Press

For spun piles, an auger press is employed. These cranes are equipped with a screw head that is used to dig the dirt inside the pile and to push the pile into the earth. Due to the fact that the dirt was removed during the pile installation, this significantly reduces vibration and soil movement into the surrounding region. This method is common in locations with soft soils, such as Bangkok and its environs, as well as construction sites adjacent to other structures.

Pressing with Jack-in pile

It operates by anchoring the pile to the ground until it reaches the necessary weight capacity. The size of the pressed weight is determined by the safety ratio. As a result, this type of installation is vibration-free and eliminates the sound of piling. As a result, this form of pile construction is appropriate for urban locations with neighboring high-rise buildings.  

Research & Development

Has R&D Policy (Y/N)

No

R&D Cost — Label

Research and development (R&D) expenses over the past 3 years (Million Baht)

R&D Cost — This Year

0.0

R&D Cost — Last Year

0.0

R&D Cost — 2 Years Ago

0.0

Assets Used in the Business

Permanent Assets — Description

On 31 December 2024, the Company's fixed assets had a net book value of 1,324.24 million baht, as reflected in the financial statements, which can be summarized as follows:

(Unit : Million baht)

Permanent Assets — Appraisal

AssetOwnershipObligationAppraisal Value
Land and land improvementsOwned by the Company Partial mortgage551.8
Buildings and factoriesOwned by the Company Partial mortgage251.5
Machinery and Equipment Owned by the Company. Some parts are being paid in installments per the finance lease agreement.Some machines and equipment are registered as business collateral.368.94
Furniture, Fixtures & Office SuppliesOwned by the Company None3.15
VehiclesOwned by the Company. Some parts are being paid in installments per the finance lease agreement.None54.16
Assets under ConstructionOwned by the Company None56.21
Right-of-use AssetsOwned by the Company None33.85

Intangible Assets — Description

The Company has intangible assets which is the right to use computer software, such as accounting software and resource management (Enterprise Resource Planning or ERP). As of December 31, 2023, the Company's intangible assets have the net book value after deduction of amortization in the financial statements is equal to 4.63 million baht, which can be summarized as follows:

(Unit : Million baht)

Intangible Assets — Appraisal

AssetTypeAppraisal Value
Accounting and Resource Management SoftwareSoftware4.63

Has Subsidiaries Investment Policy (Y/N)

No

Marketing Policy & Competition

Reporting Mode

3117

Marketing Policy (Overall)

The Company has a policy to determine the prices of products and services as follows: 

1) Product pricing: Competitive Price

Since the business of manufacturing and distributing prestressed concrete is highly competitive, the Company will set a competitive price using the method of cost plus by taking the cost of the product and added with the appropriate gross margin depending on the demand and supply in the market at that time. The price shall be competitive in the market and customers can control the construction budget of the project. The Company focuses on quality and service so that the projects should not cost customers higher than their set budgets.


2) Shipping service pricing

The Company has a policy to offer prices that are suitable for customers, which are determined by the conditions of shipping services. The important factors that are taken into consideration to determine a service charge are distance, fuel cost, and labor cost. The service fee rate can be adjusted according to the above factors, allowing the Company to reduce the risk from the impact of oil price fluctuations.


3) Piling services pricing

The Company has a policy of offering prices depending on the difficulty of each job and the type of piling service. The Company shall have an expert engineer to provide suggestions and oversee the site to ensure an efficient pile driving process. The Company also has personnel with expertise and a variety of up-to-date machines such as jack-in pile, hydraulic crane, track wheel crane, rubber wheel crane, gantry cranes, etc.

Industry & Competition (Overall)

The prestressed concrete pile business in 2024 clearly shows a recovery trend in the construction sector, both public and private sectors . Although the overall economy still has to deal with the impact of the COVID- 19 outbreak and the volatility of raw material prices such as steel and cement, important government infrastructure projects such as motorways and public transport development projects, as well as energy and electricity projects, have resumed their operations, resulting in a continuous increase in demand for prestressed concrete pile products. Meanwhile, the private sector has begun to recover by investing in real estate projects, industrial estates, and logistics systems, especially in the Eastern Economic Corridor ( EEC) , which is considered a hub for foreign investment that focuses on advanced technology and modern industries.


However, the overall market picture in 2024 will have challenges that cannot be overlooked, including higher production costs from raw material and energy prices, as well as delays in government budget disbursements that cause many projects to be implemented simultaneously at the same time, resulting in more intense competition in the market. Manufacturers who can control costs and adapt quickly will have an advantage in capturing market share.


From the perspective of executives and investors, the strategy for success in 2025 must therefore focus on both increasing production efficiency and systematically expanding the market.


First, investment in advanced technology and machinery will help reduce unit costs and increase production capacity, especially the development of subsidiaries to produce key raw materials such as high-tensile steel wire, which can reduce production costs by 20-30%. In addition, automatic quality control systems and continuous machinery maintenance will help make the production process more efficient and reduce potential losses.


Secondly, expanding the customer base is essential in 2025 , especially by penetrating the market among large contractors and foreign companies investing in Thailand, including expanding the market in the EEC area , which is a region with high growth potential in the electric vehicle ( EV) industry , petrochemicals, and electronics. Building strong business partnerships with project developers and government agencies will help access market opportunities effectively.


Thirdly, product differentiation and sustainability are important factors in building investor confidence. By offering environmentally friendly products and managing them according to ESG (Environmental, Social, Governance) principles , businesses can clearly demonstrate their social and environmental responsibility, which is what modern investors expect. Reducing energy consumption and installing solar rooftop systems in manufacturing plants are examples of commitment to long-term sustainability.


Finally, developing human resources and managing the organization to be transparent and efficient is the key to responding to the rapidly-emerging challenges. Executives should focus on training and developing the potential of employees at all levels, including using customer data management ( CRM) systems to collect and analyze customer needs in real time. Regular meetings with sales teams and factory teams will help make decisions and adjust strategies in a timely manner.


In conclusion, although 2024 will be a year full of cost and competition challenges, with a comprehensive strategy adjustment covering production, marketing, management and sustainability, the prestressed concrete pile business has the potential to grow and create added value for investors in 2025. Executives with vision and the ability to quickly adapt will be able to lead the business to long-term success and increase the attractiveness of this industry in the eyes of modern investors.

Procurement of Products & Services

Reporting Mode

3117

Procurement (Overall)

Production Process

Step 1 Prepare steel formwork , Coat formwork with crude oil , Install stirrub and prestressed wire

Step 2 Prestress the steelwire

Step 3 Bind the steel forwork , Inspect and adjust the spacing of stirrub

Step 4 Weight and inspact raw materials , Mix concrete , Perform slump test and prepare concrete test

Step 5 Pour concrete mix continuous and tighten the concrete evenly

Step 6 Weight and inspect raw materials , Mix concrete , Perform slump test and prepare concrete test cube

Step 7 Stamp the STEC company brand and the certified TIS Industrial Standard mark

Step 8 Perform concrete curing then test the compressive strength of the concrete cube

Stec 9 Cut the steel wire and move the products to storage

Step 10 Load finished products onto transport vehicle , Perform final inspection before product delivery


Raw Material Acquisition (Overall)

The Company primarily manufactures prestressed concrete on a made-to-order basis, beginning with the mixing of raw materials and ending with the pouring of concrete onto the form, transportation, and installation of piles. Production to customer delivery takes roughly 2-3 weeks, depending on the quantity of items and the difficulty of pile driving.


Procurement of raw materials and products

The Company obtains the primary raw materials for the production of prestressed concrete products from a variety of manufacturers and distributors, the majority of whom are domestic. The following details are included.

1) The primary raw materials utilized in production are cement, stone, and sand, which are the primary components of concrete, as well as PC wire, round bars, and deformed bars for prestressed steel prior to pouring concrete. The Company will get raw materials from a variety of domestic producers and distributors, both major and small.

2) Additional raw materials and consumables, such as concrete admixtures, joints, flat steel, steel sheets, bolt heads, and wooden frames, are also available. Consumables will be purchased from domestic producers and distributors.


Raw Material Purchasing Policy To ensure efficient raw material procurement and to ensure that the Company receives raw materials that meet the quality and quantity specifications ordered at a reasonable price for the Company's primary raw materials, the Company will agree on a price in advance with a clear deadline to avoid the risk of raw material price fluctuation, and sufficient raw materials will be available. When purchasing raw materials, the Company will evaluate manufacturers based on the quality of their products, their ability to deliver goods on time, and their reliability as a raw material provider. Additionally, the Company has developed a strong and long-standing partnership with cement distributors and prestressed wire manufacturers in order to avoid raw material shortages.

Production Policy (Overall)

The Company primarily manufactures prestressed concrete on a made-to-order basis, beginning with the mixing of raw materials and ending with the pouring of concrete onto the form, transportation, and installation of piles. Production to customer delivery takes roughly 2-3 weeks, depending on the quantity of items and the difficulty of pile driving.

Production Capacity (Overall)

ItemUnitUnit (if Other)UsedCapacity
Saraburi (Donphut)Others cubic meter61.6125,000
SukhothaiOthers cubic meter60.424,000
BurirumOthers cubic meter64.718,500
UbonratchathaniOthers cubic meter47.630,000
KhonkhenOthers cubic meter38.248,000
LamphunOthers cubic meter4020,000
ChonburiOthers cubic meter57.2178,500
Saraburi (Phraphuttabat)Others cubic meter78.934,000
AllOthers cubic meter57.1478,000

Domestic/Overseas Purchase Proportion (Overall)

Raw MaterialSource CountryValue
Cement powderThailand175,064,967.17
WireThailand271,020,327.1
SteelThailand134,653,238.68
StoneThailand94,030,796.41
SandThailand45,051,305.4
Concrete admixturesThailand17,591,139.94

Projects Under Construction

Has Projects Under Construction (Y/N)

No

Debentures & Bills of Exchange

Has Debentures (Y/N)

No

Convertible Securities

Has Convertible Securities (Y/N)

No

Contents